Concrete Sealer Enviroseal DurasealZero™

DURASEALZERO™ OVERVIEW

DURASEALZero™ is a state-of-the-art, industrial strength proprietary formulation that coats concrete with a chemically bonded acrylic film that deepens colors and enhances the look of pigmented or decorative concrete. It contains no solvents and its V.O.C. (Volatile Organic Content) is Zero as determined by independent laboratory testing done in accordance with EPA Method 24. DURASEALZero™ is suitable for application to above grade, dense or porous masonry surfaces, for new or old concrete and can be applied to both dry and slightly damp surfaces.

KEY ADVANTAGES:

DURASEALZero™ resists discoloration from ultraviolet light exposure and keeps its gloss finish longer than standard concrete sealers. It will retard efflorescence while resisting oil, grease, chemical, and food stains. It helps to eliminate concrete dusting while protecting against salt and water penetration and greatly improves the resistance of concrete to damage from Freeze/Thaw.

DURASEALZero™ prevents moisture intrusion and black mold from occurring.

DURASEALZero™ is impermeable to water vapor and also shows superior resistance to acid rain, alkalis, acids, ultraviolet light and staining, ensuring a long lasting barrier. It minimizes iron staining by preventing reinforcing steel from corroding and deteriorating.

DURASEALZero™ dries in 20 to 40 minutes, can be sprayed, rolled or brushed on and cleans up easily with water. It provides excellent coverage, from 100’ to 300’ per gallon depending on surface texture.

DURASEALZero™ offers you all of these benefits in an easy to use, one component, ZERO VOC formulation.

  • Truly ZERO VOC (0 VOC)
  • EPA Compliant
  • UV Resistant
  • DurasealZero Concrete Sealer Eliminates Efflorence
  • Excellent Resistance to All Weather Environments
  • Affordable Factory Direct Pricing
  • 100% Product Replacement on Any Failed Areas
    Ten (10) Years Vertical Surfaces
    Three (3)Years Horizontal Surfaces

Where to use DURASEALZero™

 

Concrete & Stucco Walls • Concrete & Split Faced Block • Precast & Poured Concrete
Brick & Re-Pointing Mortar • Cement Floors • Concrete Walls • Hospitals & Schools
Equestrian & K-9 Projects • Residential Applications • Walkways & Sidewalks
Commercial & Industrial • Perfect For Pool Decks & Patios • Cementitious Waterproofing

 

Do not apply to any non porous stone like granite if you have a question coat a small sample and make sure you are satisfied with the results. We will not be held responsible for the contractor or homeowner making this mistake.
Call for a sample.

 

Important Note: Always test a small area of surface to be sealed to verify penetration and satisfaction of sealed appearance. Application rates will vary greatly depending on the porosity of the substrate being sealed. Average application rates are 150 square feet per gallon for first coat and 250 square feet per gallon on a second coat.

 

An application of DURASEALZero™

[click on images for larger views]

Treated with DurasealZERO Concrete and Masonry Sealer

Stucco treated withh DurasealZERO repelling water

Stucco treated withh DurasealZERO repelling water

ENVIROSEAL ZERO TM USED OIL POURED ON

AFTER 24 HOURS USED ENGINE OIL WIPED OFF

DurasealZERO™ Documentation © the respective authors

DOCUMENT TOOLS

Our product information is made readily available to you! Please click a link below to begin your download. pdf Files require Adobe Acrobat Reader (.pdf format) and can be printed from their original layout.

Download AcrobatYou Can Download Adobe Acrobat Reader here

 

Enviroseal Factory and Corporate Offices

1019 Holbrook Ct.
Port St. Lucie, FL. 34952

International Calls: (772) 335-8225
Toll Free: (800) 775-9474